The Control Palette allows you to set the frequency and input power level used to analyze the top-most page of the project, which may or may not be the currently displayed system page. The power level is always at the system input; the frequency, however, is the input frequency for a receiver project or the output frequency for a transmitter project. The Solve button causes a single analysis of the system at the indicated parameters. If the system has a tunable mixer you can step the frequency up or down by the step size defined in the mixer (see Mixer Specifications). If the LO Track button is check, the tunable mixer LO will track the input frequency. If the button is unchecked, the input frequency will change but the LO will remain fixed.
You may also jump quickly to the center or extremes of the tuning range using the buttons shown below:
